EasyManuals Logo

NETGEAR GS308T User Manual

NETGEAR GS308T
351 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #302 background imageLoading...
Page #302 background image
Monitor the System
302
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
6. To clear all counters, click the Clear button.
All statistics for the trap logs are reset to their default values.
The following table describes the Trap Log information that is displayed on the page.
Table 63. Trap Logs information
Field Description
Number of Traps Since Last
Reset
The number of traps that occurred since the switch last rebooted.
Trap Log Capacity The maximum number of traps stored in the log. If the number of traps exceeds
the capacity
, the entries overwrite the oldest entries.
Number of Traps since log
last viewed
The number of traps that occurred since the traps were last displayed. Displaying
the traps by any method (terminal interface display
, web display, upload file from
switch, and so on) causes this counter to be cleared to 0.
Log The sequence number of this trap.
System Up Time The time when this trap occurred, expressed in days, hours, minutes, and
seconds, since the last reboot of the switch.
Trap Information identifying the trap.
Configure Port Mirroring
Port mirroring lets you select the network traffic of specific switch ports for analysis by a
network analyzer. You can select many switch ports as source ports but a single switch port
only as the destination port. You can configure how traffic is mirrored on a source port by
selecting packets that are received, transmitted, or both.
A packet that is copied to the destination port is in the same format as the original packet on
the wire.
This means that if the mirror is copying a received packet, the copied packet is
VLAN-tagged or untagged as it was received on the source port. If the mirror is copying a

Table of Contents

Other manuals for NETGEAR GS308T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS308T and is the answer not in the manual?

NETGEAR GS308T Specifications

General IconGeneral
Switch typeManaged
Switch layerL2
Quality of Service (QoS) supportYes
Master (outer) case width214 mm
Master (outer) case height312 mm
Master (outer) case length474 mm
Master (outer) case weight6110 g
Harmonized System (HS) code85176990
Quantity per master (outer) case6 pc(s)
Package typeBox
Package depth270 mm
Package width226 mm
Package height64 mm
Package weight750 g
Cables includedAC
Power connectorDC-in jack
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity8
StackableNo
Product colorBlack
LED indicatorsActivity, Link, Power
Country of originChina
10G support-
Multicast protocolsIGMP
Input current1 A
DC input voltage12 V
MAC address table- entries

Related product manuals