EasyManua.ls Logo

NETGEAR GS308T - Configure VLAN Membership

NETGEAR GS308T
351 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configure Switching
115
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
Configure VLAN Membership
To configure VLAN membership:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 19.
The login window opens.
4. Enter the switch’
s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching > VLAN >
Advanced > VLAN Membership.
The previous figure shows the LAG Membership page for model GS310TP.
6. In the VLAN ID menu, select the VLAN ID.
You can select a VLAN that is predefined or that you added (see Add a VLAN on
page 112).

Table of Contents

Other manuals for NETGEAR GS308T

Related product manuals