Get Started
20
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 11.
The login window opens.
4. If the browser does not display the login window, do the following:
• If you use model GS308T or model GS310TP, your browser might display a security
message and might not let you proceed. Consider the following examples:
- Google Chrome. If Google Chrome displays a Your connection is not private
message, click the ADVANCED link. Then, click the Proceed to x.x.x.x (unsafe)
link, in which x.x.x.x represents the IP address of the switch.
- Mozilla Firefox. If Mozilla Firefox displays a Your connection is not secure
message, click the ADVANCED button. Then, click the Add Exception button. In
the pop-up window that opens, click the Confirm Security Exception button.
- Microsoft Internet Explorer. If Microsoft Internet Explorer displays a There is a
problem with this website’s security certificate message, click the Continue to
this website (not recommended) link.
- Apple Safari. If Apple Safari displays a This connection is not private message,
click the Show Details button. Then, click the visit this website link. If a warning
pop-up window opens, click the Visit Website button. If another pop-up window
opens to let you confirm changes to your certificate trust settings, enter your Mac
password and click the Update Setting button.
• If you use a wired Ethernet connection, make sure that the computer is connected to
the same network that the switch is attached to or directly to one of the LAN Ethernet
ports of the switch.
• If you use a mobile device, make sure that mobile device is connected to an access
point that is attached to the same network that the switch is connected to or that the
access point is directly attached to one of the LAN Ethernet ports of the switch.
• Make sure that the switch is receiving power and that its Power LED is lit.
• Close and reopen the browser.
5. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
The following figure shows the layout of the local browser interface.
To Next Page
Loading...
Need help?
General
