NETGEAR GS308T User Manual

Specifications and Default Settings
344
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
CST Priority 128
CST External Path Cost 0
Link Aggregation
Lag Name ch<n> where n is 1 to 8
Admin Mode Enabled
Hash Mode 1 Src/Dest MAC, incoming port
STP Mode Enabled
Link Trap Enabled
LAG Type Static
Local Link Discovery Protocol (LLDP), Global
TLV Advertised Interval 30
Hold Multiplier 4
Reinitializing Delay 2
Transmit Delay 5
Fast Start Duration 3
Local Link Discovery Protocol (LLDP), Interface
Admin Status Tx and Rx
Management IP Address Auto Advertise
Notification Disabled
Optional TLVs Enabled
DHCP Snooping, Global
Admin Mode Disabled
MAC Address Validation Enabled
DHCP Snooping, Interface
Trust Mode Disabled
Logging Invalid Packets Disabled
Rate Limit N/A
Burst Interval N/A
Table 66. General feature default settings (continued)
Feature Name/Setting Default

NETGEAR GS308T Specifications

General

Switch type	Managed
Switch layer	L2
Quality of Service (QoS) support	Yes
Master (outer) case width	214 mm
Master (outer) case height	312 mm
Master (outer) case length	474 mm
Master (outer) case weight	6110 g
Harmonized System (HS) code	85176990
Quantity per master (outer) case	6 pc(s)
Package type	Box
Package depth	270 mm
Package width	226 mm
Package height	64 mm
Package weight	750 g
Cables included	AC
Power connector	DC-in jack
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Stackable	No
Product color	Black
LED indicators	Activity, Link, Power
Country of origin	China
10G support	-
Multicast protocols	IGMP
Input current	1 A
DC input voltage	12 V
MAC address table	- entries