Configure System Information
62
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Green Ethernet > Green Ethernet Configuration.
6. Select the Auto Power Down Mode Disable or Enable radio button.
By default, this mode is disabled. When a port link is down, the underlying physical layer
goes down for a short period and then checks for port link pulses again so that
auto-negotiation remains possible. In this way
, the switch saves power when no link
partner is present for the port.
7. Select the EEE Mode Disable or Enable radio button.
By default, this mode is disabled. Energy Efficient Ethernet (EEE) combines the MAC with
a family of physical layers that support operation in a low power mode. It is defined by the
IEEE 802.3az standard. Lower power mode enables both the send and receive sides of
the link to disable some functionality for power savings when the load is light.
Transition
to low power mode does not change the link status. Frames in transit are not dropped or
corrupted in transition to and from low power mode. Transition time is transparent to
upper layer protocols and applications.
8. Click the Apply button.
Your settings are saved.
Configure Green Ethernet Interface Settings
You can configure Green Ethernet settings for individual interfaces.
 To configure the Green Ethernet interface settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 19.
The login window opens.
To Next Page
Loading...
Need help?
General
