101
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
6. If required, use the Recurrence Pattern and Daily Mode fields to customize the power
shutdown schedule. These fields are available only if the scheduler type is periodic.
7. Click Add to add the new entry to the selected timer schedule.
8. Click Delete to remove the selected entry from the timer schedule.
9. Click Apply to update the settings for an entry.
10. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Note: Each timer can contain a maximum of one Absolute schedule entry
and ten Periodic schedule entries.
To Next Page
Loading...
