118
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
Voice VLAN
Configure the Voice VLAN settings for ports that carry traffic from IP phones. The Voice
VLAN feature can help ensure that the sound quality of an IP phone is safeguarded from
deteriorating when the data traffic on the port is high.
From the VLAN link, you can access the following pages:
• Voice VLAN Properties on page 118
• Voice VLAN Port Setting on page 119
• Voice VLAN OUI on page 120
Voice VLAN Properties
To display the Voice VLAN Properties page, click Switchingï€ > Voice VLAN > Basic >
Properties.
To configure Voice VLAN:
1. From the Voice VLAN Status field, enable or disable Voice VLAN on the switch. If the
switch does not handle traffic from IP phones, the status should be disabled.
2. From the Voice VLAN Aging Time field, specify the amount of time after the last IP phone’s
OUI is aged out for a specific port. The port will age out after the bridge and voice aging
time.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
4. If you make any changes to this page, click Apply to send the updated configuration to the
switch.
To Next Page
Loading...
Need help?
General