EasyManuals Logo

NETGEAR GS728TS User Manual

NETGEAR GS728TS
329 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
Configuring the Device
To modify switch information:
1. Select the switch.
2. Click Configure Device. Additional fields appear on the screen.
3. To assign or update a static IP address, default gateway, or subnet mask, disable the DHCP
client and enter the new information. You can also specify a system name and location for
the switch.
4. Type the password in the Current Password field. You cannot apply the changes without a
valid switch password. The default password for the switch is password.
5. Click Apply to update the switch with the changes to the network information.
Changing the Switch Password
1. Select the switch.
2. Click Change Password. Additional fields appear on the screen.
3. Type the switch password in the Current Password field. The default password for the
switch is password.
4. Type the new password in the New Password and Confirm Password fields. The
password can contain up to 20 ASCII characters.
5. Click Apply to update the switch with the new password.

Table of Contents

Other manuals for NETGEAR GS728TS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS728TS and is the answer not in the manual?

NETGEAR GS728TS Specifications

General IconGeneral
BrandNETGEAR
ModelGS728TS
CategorySwitch
LanguageEnglish

Related product manuals