EasyManuals Logo

NETGEAR GS728TS User Manual

NETGEAR GS728TS
329 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
107
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
LAG Membership
Use the LAG Membership page to select two or more full-duplex Ethernet links to be
aggregated together to form a link aggregation group (LAG), which is also known as a
port-channel. The switch can treat the port-channel as if it were a single link.
To access the LAG Membership page, click Switching> LAG > Basic > LAG Membership.
To create a LAG:
1. From the LAG ID field, select the LAG to configure.
2. In the LAG Name field, enter the name to assign the LAG. You may enter any string of up to
15 alphanumeric characters.
3. Click the orange bar to display the ports.
4. Click the box below each port to include in the LAG. The following figure shows an example
of how to configure LAG1 with ports 6, 7 and 8 on Unit 1 as members.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
6. If you make any changes to this page, click Apply to send the updated configuration to the
switch. Configuration changes take effect immediately.
7. To view the ports that are members of the selected LAG, click Current Members.

Table of Contents

Other manuals for NETGEAR GS728TS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS728TS and is the answer not in the manual?

NETGEAR GS728TS Specifications

General IconGeneral
BrandNETGEAR
ModelGS728TS
CategorySwitch
LanguageEnglish

Related product manuals