NETGEAR GS728TS - Class Configuration

186
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
The following table describes the information displayed in the Status table on the DiffServ
Configuration page:
Field Description
Class Table Displays the current and maximum number of rows of the class table.
Class Rule Table Displays the current and maximum number of rows of the class rule table.
Policy Table Displays the current and maximum number of rows of the policy table.
Policy Instance Table Displays the current and maximum number of rows of the policy instance
table.
Policy Attributes Table Displays the current and maximum number of rows of the policy attributes
table.
Service Table Displays the current and maximum number of rows of the service table.
Click Refresh to update the page with the current settings.
Class Configuration
Use the Class Configuration page to add a new DiffServ class name, or to rename or delete
an existing class. The page also allows you to define the criteria to associate with a DiffServ
class. As packets are received, these DiffServ classes are used to prioritize packets. You can
have multiple match criteria in a class. The logic is a Boolean logical-and for this criteria. After
creating a Class, click the class link to the Class page.
To display the page, click QoS > DiffServ > Advanced > Class Configuration.