241
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
In the following figure, the MAC ACL named mac-acl2 is being applied to ports g13 and
g20-g22. As the Interface Binding Status table indicates, these ports also have a MAC
ACL named mac-acl applied in the inbound direction.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5. Click Apply to save any changes to the running configuration.
MAC Binding Table
Use the MAC Binding Table page to view or delete the MAC ACL bindings.
To display the MAC Binding Table, click Security > ACL > Basic > Binding Table.
To Next Page
Loading...
Need help?
General