254
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
IP Binding Table
Use the IP Binding Table page to view or delete the IP ACL bindings.
To display the IP Binding Table, click Security > ACL > Advanced > Binding Table.
The following table describes the information displayed in the IP ACL Binding Table.
Field Description
Interface Displays the interface to which the IP ACL is bound.
Direction Specifies the packet filtering direction for ACL. The only valid direction is
Inbound, which means the IP ACL rules are applied to traffic entering the
port.
ACL Type Displays the type of ACL assigned to selected interface and direction.
ACL ID/Name Displays the ACL number or name that identifies the ACL assigned to
selected interface and direction.
Sequence Number Displays the Sequence Number signifying the order of specified ACL relative
to other ACLs assigned to selected interface and direction.
To delete an IP ACL-to-interface binding, select the check box next to the interface and click
Delete. Click Cancel to abandon any changes.
To Next Page
Loading...
