NETGEAR GS728TS User Manual

159
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
Static MAC Address
Use the Static MAC Address Configuration page to configure and view static MAC addresses
on an interface.
To access the Static MAC Address Configuration page, click Switching> Address Table >
Advanced > Static MAC Address.
To configure a static MAC address:
1. To add a static MAC address entry:
a. From the Interface menu, select the port or LAG on which to configure the static MAC
address.
b. Specify the MAC address to add.
c. Select the VLAN ID corresponding to the MAC address to add.
d. Click Add.
2. To delete a static MAC address, select the check box next to the entry and click Delete.
3. To modify the settings for a static MAC address, select the check box next to the entry,
update the desired values, and click Apply.
4. Click Refresh to reload the page and display the latest MAC address learned on a specific
port.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.

NETGEAR GS728TS Specifications

General

Brand	NETGEAR
Model	GS728TS
Category	Switch
Language	English