NETGEAR GS728TS - PoE;PoE+ (GS728 TPS and GS752 TPS Only)

70
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
PoE/PoE+ (GS728TPS and GS752TPS Only)
Ports g1–g8 on the GS728TPS and GS752TPS are PoE+ (IEEE 802.3at) compliant ports.
Each port is capable of delivering up to 30W of reliable, uninterrupted power to connected
PoE-powered devices (PD). Ports g9–g24 on the GS728TPS and ports g9–g48 on the
GS752TPS are PoE (IEEE 802.3af) ports that are capable of delivering up to 15W of power
to connected PDs.
The GS728TPS can provide a total of 192W of power to all connected devices. The
GS752TPS can provide a total of 384W of power to all connected devices.You can configure
per-port priority settings, timers, and power limits to manage the power supplied to the
connected PDs and to ensure that the power budget for each switch is used effectively.
From the PoE link under the System tab, you can view and configure PoE settings for the
switch and for ports.
From the PoE link, you can access the following pages:
• PoE Configuration on page 70
• PoE Port Configuration on page 72
PoE Configuration
Use the PoE Configuration page to view global PoE power information and to configure PoE
settings.
To display the PoE Configuration page, click System > PoE > Basic > PoE Configuration.
Note: You can also access the PoE Configuration page by clicking System
> PoE > Advanced > PoE Configuration.