NETGEAR GS728TS - Diffserv Configuration

185
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
To display the page, click QoS > DiffServ. The Differentiated Services menu page contains
links to the following features:
• Diffserv Configuration on page 185
• Class Configuration on page 186
• IPv6 Class Configuration on page 189
• Policy Configuration on page 191
• Service Configuration on page 195
• Service Statistics on page 196
Diffserv Configuration
Use the Diffserv Configuration page to display DiffServ General Status Group information,
which includes the current administrative mode setting as well as the current and maximum
number of rows in each of the main DiffServ private MIB tables.
To display the page, click QoS > DiffServ > Advanced > Diffserv Configuration.
To configure the global DiffServ mode:
1. Select the administrative mode for DiffServ:
• Enable. Differentiated Services are active.
• Disable. The DiffServ configuration is retained and can be changed, but it is not
active.
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
3. If you make changes to the page, click Apply to apply the changes to the system.