NETGEAR GS728TS - Configuring Switching Information

102
3
3. Configuring Switching Information
Use the features in the Switching tab to define Layer 2 features. The Switching tab contains
links to the following features:
• Ports on page 102
• Link Aggregation Groups on page 105
• VLANs on page 110
• Voice VLAN on page 118
• Auto-VoIP on page 121
• Spanning Tree Protocol on page 122
• Multicast on page 135
• Forwarding Database on page 156
Ports
The pages on the Ports tab allow you to view and monitor the physical port information for
the ports available on the switch. From the Ports link, you can access the following pages:
• Port Configuration on page 102
• Flow Control on page 104
Port Configuration
Use the Port Configuration page to configure the physical interfaces on the switch.
To access the Port Configuration page, click Switching > Ports > Port Configuration.