NETGEAR GS728TS User Manual

291
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
Dual Image Status
You can use the Dual Image Status page to view information about the system images on the
device.
To display the Dual Image Status page, click Maintenance > File Management > Dual Image
> Dual Image Status.
The following table describes the information on the Dual Image Status page.
Field Description
Unit The unit ID of the switch is always 1.
Image1 Ver Displays the version of the image1 code file.
Image2 Ver Displays the version of the image2 code file.
Current-active Displays the currently active image on this switch.
Next-active Displays the image to be used on the next restart of this switch.
Image1 Description Displays the description associated with the image1 code file.
Image2 Description Displays the description associated with the image2 code file.
Click Refresh to display the latest information from the switch.
For information about how to update or change the system images, see File Management on
page 288.

NETGEAR GS728TS Specifications

General

Brand	NETGEAR
Model	GS728TS
Category	Switch
Language	English