9
1
1. Getting Started
The NETGEAR
®
GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch Software
Administration Manual describes how to configure and operate the GS728TS, GS728TPS,
GS752TS, and GS752TPS Gigabit Smart Switches by using the Web-based graphical user
interface (GUI). This manual describes the software configuration procedures and explains the
options available within those procedures.
Document Organization
The GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch Software
Administration Manual contains the following chapters:
• Chapter 1, Getting Started, contains information about performing the initial system
configuration and accessing the user interface.
• Chapter 2, Configuring System Information, describes how to configure administrative
features such as SNMP, DHCP, PoE, and Green Ethernet. It also describes how to
configure stacking on the switches.
• Chapter 3, Configuring Switching Information, describes how to manage and monitor the
layer 2 switching features.
• Chapter 4, Configuring Routing, describes how to manage and monitor IP routing.
• Chapter 5, Configuring Quality of Service, describes how to manage the Access Control
Lists (ACLs), and how to configure Differentiated Services and Class of Service features.
• Chapter 6, Managing Device Security, contains information about configuring switch
security information such as port access control and RADIUS server settings.
• Chapter 7, Monitoring the System, describes how to view a variety of information about
the switch and its ports, and to configure how the switch monitors events.
• Chapter 8, Maintaining the System, describes features to help you manage the switch.
• Chapter 9, Accessing Help, describes how to access Online Help resources for the
switch.
• Appendix A, Hardware Specifications and Default Values, contains hardware
specifications and default values on the GS728TS, GS728TPS, GS752TS, and
GS752TPS Smart Switches.
To Next Page
Loading...
Need help?
General