43
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
Click Refresh to refresh the page with the most current data from the switch.
SNTP Server Configuration
Use the SNTP Server Configuration page to view and modify information for adding and
modifying Simple Network Time Protocol SNTP servers.
To display the SNTP Server Configuration page, click System > Management > Time > SNTP
Server Configuration.
Address Type Specifies the address type of the SNTP Server address for the last received
valid packet.
Server Stratum Specifies the claimed stratum of the server for the last received valid packet.
Reference Clock Id Specifies the reference clock identifier of the server for the last received valid
packet.
Server Mode Specifies the mode of the server for the last received valid packet.
Unicast Server Max
Entries
Specifies the maximum number of unicast server entries that can be configured
on this client.
Unicast Server Current
Entries
Specifies the number of current valid unicast server entries configured for this
client.
Field Description