202
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
The following table describes the RADIUS server statistics available on the page.
Field Description
Server Address This displays all configured RADIUS servers.
Round Trip Time The time interval, in hundredths of a second, between the most recent
Access-Reply/Access-Challenge and the Access-Request that matched it
from this RADIUS authentication server.
Access Requests The number of RADIUS Access-Request packets sent to this server. This
number does not include retransmissions.
Access Retransmissions The number of RADIUS Access-Request packets retransmitted to this
server.
Access Accepts The number of RADIUS Access-Accept packets, including both valid and
invalid packets, that were received from this server.
Access Rejects The number of RADIUS Access-Reject packets, including both valid and
invalid packets, that were received from this server.
Access Challenges The number of RADIUS Access-Challenge packets, including both valid and
invalid packets, that were received from this server.
Malformed Access
Responses
The number of malformed RADIUS Access-Response packets received
from this server. Malformed packets include packets with an invalid length.
Bad authenticators or signature attributes or unknown types are not included
as malformed access-responses.
Bad Authenticators The number of RADIUS Access-Response packets containing invalid
authenticators or signature attributes received from this server.
Pending Requests The number of RADIUS Access-Request packets destined for this server
that have not yet timed out or received a response.
Timeouts The number of authentication timeouts to this server.
Unknown Types The number of RADIUS packets of unknown type which were received from
this server on the authentication port.
Packets Dropped The number of RADIUS packets received from this server on the
authentication port and dropped for some other reason.
Use the buttons at the bottom of the page to perform the following actions:
• Click Clear Counters to clear the authentication server and RADIUS statistics to their
default values.
• Click Refresh to refresh the page with the most current data from the switch.
To Next Page
Loading...
Need help?
General