EasyManuals Logo

NETGEAR GS728TS User Manual

NETGEAR GS728TS
329 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #265 background imageLoading...
Page #265 background image
265
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
Packets Transmitted
256-511 Octets
The total number of packets (including bad packets) transmitted that were
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets Transmitted
512-1023 Octets
The total number of packets (including bad packets) transmitted that were
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets Transmitted
1024-1518 Octets
The total number of packets (including bad packets) transmitted that were
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets Transmitted >
1522 Octets
The total number of packets (including bad packets) transmitted that were
between over 1522 octets in length inclusive (excluding framing bits but
including FCS octets).
Maximum Frame Size The maximum Ethernet frame size the interface supports or is configured to
support. The maximum size includes the Ethernet header, CRC, and payload.
(1518 to 9216). The default maximum frame size is 1518.
Total Packets Transmitted
Successfully
The number of frames that have been transmitted by this port to its segment.
Unicast Packets
Transmitted
The total number of packets that higher-level protocols requested be
transmitted to a subnetwork-unicast address, including those that were
discarded or not sent.
Multicast Packets
Transmitted
The total number of packets that higher-level protocols requested be
transmitted to a Multicast address, including those that were discarded or not
sent.
Broadcast Packets
Transmitted
The total number of packets that higher-level protocols requested be
transmitted to the Broadcast address, including those that were discarded or
not sent.
Total Transmit Errors The sum of Single, Multiple, and Excessive Collisions.
Tx FCS Errors The total number of packets transmitted that had a length (excluding framing
bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but
had a bad Frame Check Sequence (FCS) with an integral number of octets
Tx Oversized The total number of frames that exceeded the max permitted frame size. This
counter has a max increment rate of 815 counts per second at 10 Mb/s.
Underrun Errors The total number of frames discarded because the transmit FIFO buffer
became empty during frame transmission.
Total Transmit Packets
Discarded
The sum of single collision frames discarded, multiple collision frames
discarded, and excessive frames discarded.
Single Collision Frames A count of the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by exactly one collision.
Multiple Collision Frames A count of the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by more than one collision.
Field Description

Table of Contents

Other manuals for NETGEAR GS728TS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS728TS and is the answer not in the manual?

NETGEAR GS728TS Specifications

General IconGeneral
BrandNETGEAR
ModelGS728TS
CategorySwitch
LanguageEnglish

Related product manuals