269
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
The following table shows the information the Cable Test page shows:
Field Description
Cable Status Displays the cable status.
• Normal: the cable is working correctly.
• Open: the cable is disconnected or there is a faulty connector.
• Short: there is an electrical short in the cable.
• Cable Test Failed: The cable status could not be determined. The
cable may in fact be working.
• Unknown: The test has not been performed.
Cable Length The estimated length of the cable in meters. The length is displayed as a
range between the shortest estimated length and the longest estimated
length. Unknown is displayed if the cable length could not be determined.
The Cable Length is displayed only if the cable status is Normal.
Failure Location The estimated distance in meters from the end of the cable to the failure
location. The failure location is displayed only if the cable status is Open
or Short.
Click Refresh to refresh the data on the screen and display the most current statistics.
To Next Page
Loading...
