34
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
Click Refresh to refresh the screen with most recent data.
The following table describes the status information the Slot Information displays.
Field Description
Slot Summary
Slot Identifies the slot using the format unit/slot.
Status Displays whether the slot is empty or full.
Administrative State Displays whether the slot is administratively enabled or disabled.
Power State Displays whether the slot is powered on or not.
Configured Card Model ID Displays the model ID of the card configured for the slot.
Configured Card Description Displays the description of the card configured for the slot.
Inserted Card Model ID Displays the model ID of the card physically present in the slot.
Inserted Card Description Displays the description of the card physically present in the slot.
Card Power Down Displays whether the card in the slot is powered down.
Card Pluggable Displays whether the inserted card is pluggable or not.
Supported Card
Card Model Lists summary information about the card models supported for the
stackable units.
Card Index Displays the index assigned to the selected card type.
Card Type Displays the hardware type of this supported card. This is a 32-bit data
field.
Card Descriptor Displays the additional information about each supported card.
Supported Switch
Switch Model ID Displays the list of models of all supported switches.
Switch Index Displays the index assigned to the selected switch.
Management Preference Identifies whether the unit prefers to be a stack master or stack member.
Code Type Displays the Code Target ID on the supported switch
To Next Page
Loading...
Need help?
General