81
S
MARTNA™ 10G NETWORK ACCESS (SMARTNA-X)
COMMAND LINE INTERFACE REFERENCE |
DRAFT
SET/SHOW LOCATION
Use the set location command to specify the physical location of this device (for example, ‘Service rack, Boston
datacenter’). Use the show location command to display the current system location string.
Command form set location location-string
show location
Example Set the system location string to Service rack, Boston datacenter:
location-string Specifies the system location string. Use up to 19 alpha-numeric characters. Spaces
are allowed. If the string includes a comma and you are using a RADIUS server, the
comma will replaced by an underscore when viewed in server logs. Default:
“Network Critical”.
CONTROLLER>set name Service rack, Boston datacenter
To Next Page
Loading...
