This procedure activates incoming MIDI notes that you play on the keyboard. If you
wish to activate MIDI signals coming from the MIDI IN socket on the rear panel of
the keyboard, you have to change the corresponding status in the KONTROL S[xx]
MK3 (MIDI) row (macOS) or in the MIDIIN3 (KONTROL S[xx] MK3) row (Windows).
For more information on using the MIDI IN and MIDI OUT sockets on the rear panel of
your keyboard, refer to Connecting External MIDI Devices to the Keyboard.
Setting Up the Stand-Alone Komplete Kontrol Application
Conguring the Audio Interface in Komplete Kontrol
In the Komplete Kontrol software, do the following:
1. In the Komplete Kontrol menu click Edit > Preferences to open the Preferences.
2. Click Audio to display the Audio page.
3. Select the hardware driver supported by your audio interface from the Driver drop-down menu.
4. Select the audio interface from the Device drop-down menu.
5. Under Routings, select the left and right output channels that you want to use
for Komplete Kontrol’s master output in the Komplete Kontrol Out 1 L and
Komplete Kontrol Out 1 R drop-down menus.
Preferences panel – Audio page.
Enabling MIDI Control in Komplete Kontrol
In the Komplete Kontrol software, do the following:
1. In the Komplete Kontrol menu click Edit > Preferences to open the Preferences.
2. Click MIDI to display the MIDI page.
SETT I N G UP YOUR KEYBO A R D 8
To Next Page
Loading...
Need help?
General