Using the Keyboard with a Power Supply Only
In order to function as stand-alone MIDI controller, your keyboard needs a power source. This
section describes the two available options, depending on your setup environment.
If your keyboard is connected to an “always-on” USB-C port on your computer or hub, the USB-C
port provides power to your keyboard even if your computer is turned off, and you can use your
keyboard as a stand-alone MIDI controller.
If your keyboard is not connected to an “always-on” USB-C port on your computer or hub, or if your
computer/hub is not around, you will need a USB-C power supply (5 V, 7.5 W or higher, 1.5 A or
higher), which is not included. To power up your keyboard, do as follows:
1. Attach the USB-C power supply to the at, power-only USB-C socket on the rear panel of your
keyboard.
2. Plug the USB-C power supply into the wall outlet.
3. Press the ON switch on the rear panel of the keyboard to switch it on.
→ The keyboard turns on and you can use it as a stand-alone MIDI controller.
MIDI M O D E 75
To Next Page
Loading...
Need help?
General