Organizing the Loaded Products
The Plug-in mode provides a few tools to help you organize the products that you have loaded.
With these tools you can:
• remove products,
• bypass Effects in Komplete Kontrol,
• reorder Effects in Komplete Kontrol.
Removing Products
You can remove a product loaded in a slot.
This feature is not available in Edit view. To access it, rst deactivate Edit view by
pressing the lit Button 8 (Edit).
In order to remove a product:
1. In Plug-in mode, use Button 1 and 2 to select the desired slot.
2. Press SHIFT + Button 4 (Remove) to remove the product from the slot:
→ If your keyboard is connected to the Kontakt software, the selected Instrument is removed from
the Rack. If your keyboard is connected to the Komplete Kontrol software, the selected Effect is
removed from the Plug-in chain. The display switches to the next or previous slot, if available.
When your keyboard is connected to the Komplete Kontrol software, you cannot
remove the Instrument, Loop or One-shot loaded in the rst slot of the Plug-in chain.
For more information on the Plug-in chain, refer to the Komplete Kontrol manual.
Bypassing Effects in Komplete Kontrol
When your keyboard is connected to the Komplete Kontrol software, if you want to temporarily
listen to the Instrument without a specic Effect for an A/B comparison but do not want to delete it
from the Plug-in chain, you can bypass the Effect from your keyboard.
This feature is not available in Edit view. To access it, rst deactivate Edit view by
pressing the lit Button 8 (Edit).
In order to bypass an Effect:
1. In Plug-in mode, use Button 1 and 2 to select the desired slot.
CONT R O L LING INSTRUMENT S A N D EFFECTS 34
To Next Page
Loading...
Need help?
General