Within a page, parameters are often organized into sections, for example according to the
submodule they belong to. The section names show up above the parameter names on the
display.
When switching pages or scrolling parameters one at a time, you are not limited to
the current group: Once you have reached the last element in the group, the navigation
continues in the next/previous group.
Classic View
In some situations, you might prefer to control a NKS product using the legacy NKS navigation.
For example, this can be the case if you are used to certain parameter positions in the parameter
pages and do not want to disturb your workow, or if you have created custom mappings with the
legacy NKS and want to keep using them. This is the purpose of the Classic view.
In Classic view, all the NKS parameters available are organized into a at list of parameter pages.
For legacy NKS products, the Classic view is the only view available in Plug-in mode,
and it cannot be deactivated.
Opening the Classic View
The Classic view cannot be opened if the Edit view is active. To access it, rst close
the Edit view by pressing the lit Button 8 (Edit).
CONT R O L LING INSTRUMENT S A N D EFFECTS 32
To Next Page
Loading...
Need help?
General