• If the slot contains a preset, the product name appears under Button 1 and 2 and the preset
name appears below:
• After all the slots containing presets (if any), an empty slot is always available, indicated by the
Empty label:
To select another slot:
▶ Press Button 1 or 2 to select the previous or next slot, respectively.
You can also select slots in the same way in the Browser.
Adjusting Parameters
In Plug-in mode, the Knobs 1–8 below the display are automatically assigned to parameters of the
selected product:
• Above each knob, the display shows the parameter name with a visual illustrating the type of
parameter and its current value.
• When you touch a knob, additional info temporarily appear above the knob depending on the
parameter type (for example the current value, a list with available values, etc.).
• When you turn a knob, the parameter is adjusted accordingly in the connected software
(Kontakt or Komplete Kontrol), as mirrored on the display.
The following table lists the various parameter types available and provides examples of visuals
when the knob is resting and when you touch it.
Parameter Type Knob Resting Knob Touched
Continuous, unipolar
CONT R O L LING INSTRUMENT S A N D EFFECTS 27
To Next Page
Loading...
Need help?
General