This section describes
how
to take pictures
in
0 (auto) mode,
an
automatic,
IIpoint-and-shoot
ll
mode recommended for first-time
users
of
digital cameras.
1
Press
the
power switch to turn on the camera.
The power-on lamp (green) will light for a
moment
and
the monitor will turn on.
In
this step, the lens will
also
open.
Proceed
to
step 4 when
r!I
is
displayed.
5710
2
Press~.
3
Press
the
rotary multi
selector"
or T to
choose
0 and
press
@.
The camera enters
10
(auto) mode.
Monitor
Description
NO
INDICATOR
Battery fully charged.
4 Check the battery level and number
of
exposures remaining.
Battery
Level
i/!i1""~
Number
of
exposures
remaining
Battery
level
indicator
Battery low; prepare
to
charge or
replace the battery.
Cannot take pictures. Recharge or
replace
with
a fully charged
battery. .
Battery
exhausted.
Number of
Exposures
Remaining
The number
of
pictures that
can
be stored depends on the capacity
of
the internal
memory or memory card and image mode setting
(~
96).
20
To Next Page
Loading...
