~
Observe caution when
handling
the
battery
The battery may leak or explode
if
improperly handled. Observe the
following precautions when handling
the battery for
use
in
this product:
• Before replacing
the
battery, turn
the
product off. Ifyou
are
using the
AC
adapter, be sure it
is
unplugged.
• Only
use
a Rechargeable Li-ion
Battery
EN-EL
12
(supplied). Charge
the battery by inserting it in a
Battery Charger MH-65 (supplied).
• When inserting
the
battery,
do
not
attempt
to
insert it upside
down
or
backwards.
• Do
not
short or disassemble the
battery or
attempt
to
remove or
break the battery insulation or
casing.
• Do
not
expose the battery
to
flame
or
to
excessive heat.
• Do
not
immerse
in
or expose
to
water.
• Replace the terminal cover when
transporting the battery. Do
not
transport or store
with
metal objects
such
as
necklaces or hairpins.
• The battery
is
prone
to
leakage
when fully discharged.
To
avoid
damage
to
the
product, be sure
to
remove
the
battery when no charge
remains.
• Discontinue
use
immediatelyshould
you notice any change
in
the
battery, such
as
discoloration or
deformation.
• If liquid from the damaged battery
comes
in
contact
with
clothing or
For
Your
Safety
skin,
rinse immediately with plenty
of
water.
~
Observe
the
following
precautions when handling
the battery charger
•
Keep
dry. Failure
to
observe this
precaution could result
in
fire or
electric shock.
• Dust on or near the metal parts
of
the plug should be removed
with
a
dry cloth. Continued
use
could
result
in
fire.
• Do
not
handle the power cable or
go
near
the
battery charger during
lightning storms. Failure
to
observe
this precaution could result
in
electric shock.
• Do
not
damage, modify, forcibly
tug
or bend the power cable, place
it
under heavy objects, or expose it
to
heat or flames. Should the insulation
be damaged and the wires become
exposed, take it
to
a Nikon-
authorized service representative for
inspection. Failure
to
observe these
precautions could result
in
fire or
electric shock.
• Do
not
handle the plug or battery
charger
with
wet
hands. Failure
to
observe this precaution could result
in electric shock.
• Do
not
use
with
travel converters or
adapters designed
to
convert from
one voltage
to
another or with
DC-
to-AC inverters. Failure
to
observe
this precaution could damage the
product or result
in
overheating or
fire.
11/