VRA53801-R.3609.A
- M1 ･ -
LS-50
Specications
・Adapter, holder
(Standard accessory）
Slide mount adapter : MA-21
Strip lm adapter : SA-21
（Option）
APS lm adapter : IA-20(S)
Strip lm holder : FH-3 （Insert into MA-21 for use）
Medical holder : FH-G1（Insert into MA-21 for use）
APS strip lm holder : FH-A1 (Insert MA-21 for use）
SA-20, SA-30 and SF-210 are not available (out-of-support adapter）.
MA-20/MA-20(S) are operationally compatible with MA-21.
However, it is impossible to insert MA-21 to LS-2000/30.
IA-20 is operationally compatible with IA-20(S).
It is possible to insert FH-1 and FH-2 to MA-21, (but image processing is different).
・Appropriate lm
35-mm lm (Color / monochrome / positive / negative）
Slide mount (1.0-mm - 3.2-mm in thickness; 49-mm - 50.8-mm in width）
Strip lm (up to 6 frames)
APS cartridge lm
Glass microscope slides （26-mm × 76-mm; 0.8mm - 1.5-mm in thickness）
・How to insert
Slide mount ：Insert into MA-21
35-mm strip 1 - 6 frames ：With FH-3, insert into MA-21
35-mm strip (2-6 frames) ：Insert into SA-21
APS cartridge ：Insert into IA-20(S)
APS strip lm ：With FH-A1, insert into MA-21
Glass microscope slides ：With FH-G1, insert into MA-21
・Scanning
Film-xed, optical CCD-mobile single-pass scan
To Next Page
Loading...
Need help?
General
