Nikon COOLSCAN V ED - Page 63

VRA53801-R.3609.A
- A43 ･ -
LS-50
・MTF
Select "Run" on the main menu, then choose "Mechanical Precision Test" and "MTF" from the pulldown menus.
In case of NG: Clean/apply grease on the AF mechanism unit and clean the optical system, or replace the mecha-block
unit.
・Flare
Select "Run" on the main menu, then choose "Mechanical Precision Test" and "Flare" from the pulldown menus.
In case of NG: Clean the optical system and inspect the AF mechanism unit.
Inspection result on MTF
Inspection result on Flare