NMC-WOLLARD 2021Truax Blvd., Eau Claire, WI 54703, Phone (715) 835-3151, Fax (715) 835-6625
M140 Tow Tractor Manual No. 46054
PAGE 1-23
CHAPTER 2 MAINTENANCE
1 SERVICING
AUGUST 31, 2008
Malfunctions
Automatic transmission
malfunctions may be
caused by poor engine
performance or improper
transmission adjustments.
You should always begin
by checking engine
level and condition, and
gearshift cable adjustment.
If the problem exists
after these checks
and adjustments are
completed, remove tractor
from service and refer
the transmission to a
transmission repair facility.
NOTICE! If you ever notice
unusual noises such as
gear noise or grinding, a
buzz or whine, knocks,
scraping, clicking, etc.,
remove the tractor from
service and refer it to a transmission repair facility.
Transmission Adjustments for C6
Most repair facilities can perform intermediate band and neutral start switch
adjustments.
NOTICE! When making band adjustments, FOLLOW SPECIFICATIONS
EXACTLY. Failure to do so may cause serious damage to the transmission.
The intermediate band may need to be occasionally adjusted to compensate
for normal wear. Adjust band at every transmission oil change.
FIGURE 4. ADJUSTING THE INTERMEDIATE
BAND - C6
To Next Page
Loading...
