Nokia 7705 - 4.2 Common Configuration Tasks; 4.2.1 Modifying File Attributes

Basic System Configuration Guide File System Management
Edition: 01 3HE 11010 AAAC TQZZA 111
4.2 Common Configuration Tasks
The following sections describe the basic system tasks that can be performed.
• Modifying File Attributes
• Creating and Navigating Directories
• Copying Files
• Moving Files
• Deleting Files and Removing Directories
• Displaying Directory and File Information
• Repairing the File System
4.2.1 Modifying File Attributes
The system administrator can change the read-only attribute in the local file. Enter
the attrib command with no options to display the contents of the directory and the
file attributes.
Use the CLI syntax displayed below to modify file attributes:
CLI Syntax: file>
attrib [+r | -r] file-url
The following displays an example of the command syntax:
Example: # file
file cf3:\ # attrib
file cf3:\ # attrib +r BOF.SAV
file cf3:\ # attrib
The following displays the file configuration:
ALU-1>file cf3:\ # attrib
cf3:\bootlog.txt
cf3:\bof.cfg
cf3:\boot.ldr
cf3:\bootlog_prev.txt
Note: When a file system operation is performed with a command that can potentially delete
or overwrite a file system entry (such as a copy, delete, move, rd, or scp command), a
prompt appears to confirm the action. The force keyword performs the copy, delete, move,
rd, or scp action without displaying the confirmation prompt.