Boot Options
160
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
5.9 BOF Configuration Overview
The 7705 SAR routers do not contain a boot EEPROM. The boot loader code is
loaded from the boot.ldr file. The BOF file performs the following tasks:
1. Sets up the CSM Management port (speed, duplex, auto)
2. Assigns the IP address for the CSM Management port
3. Creates static routes for the CSM Management port
4. Sets the console port speed
5. Configures the Domain Name System (DNS) name and DNS servers
6. Configures the primary, secondary, tertiary configuration source
7. Configures the primary, secondary, and tertiary image source
8. Configures operational parameters
Note: The CSM Management port is referred to as the CPM Management port in the CLI to
align with the CLI syntax used with other SR products.
To Next Page
Loading...
