Nokia 7705 - 4.2.2 Creating and Navigating Directories; 4.2.3 Copying Files

File System Management
112
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
cf3:\BOF.SAV
ALU-1>file cf3:\ # attrib +r BOF.SAV
ALU-1>file cf3:\ # attrib
cf3:\bootlog.txt
cf3:\bof.cfg
cf3:\boot.ldr
cf3:\bootlog_prev.txt
R cf3:\BOF.SAV
4.2.2 Creating and Navigating Directories
Use the md command to create a new directory in the local file system, one level at
a time.
Use the cd command to navigate to different directories.
Use the CLI syntax displayed below to create a new directory:
CLI Syntax: file>
md file-url
The following displays an example of the command syntax:
Example: file cf3:\ # md test1
file cf3:\ # cd test1
file cf3:\test1\ # md test2
file cf3:\test1\ # cd test2
file cf3:\test1\test2\ # md test3
file cf3:\test1\test2\ # cd test3
file cf3:\test1\test2\test3 #
4.2.3 Copying Files
Use the copy command to upload or download an image file, configuration file, or
other file types to or from a flash card or a TFTP server.
The scp command copies files between hosts on a network. It uses SSH for data
transfer, and uses the same authentication and provides the same security as SSH.
The source file for the scp command must be local. The file must reside on the
7705 SAR router. The destination file must be in the format: user@host:file-name.
The destination does not need to be local.