Basic System Configuration Guide CLI Usage
Edition: 01 3HE 11010 AAAC TQZZA 73
3.9.2.3 Monitor CLI Commands
filter
Syntax filter
Context monitor
Description This command enables the context to configure criteria to monitor IP filter statistics.
ip
Syntax ip ip-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>filter
Description This command enables IP filter monitoring. The statistical information for the specified IP filter
entry is displayed at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified IP filter. The subsequent
statistical information listed for each interval is displayed as a delta to the previous screen
output.
When the keyword rate is specified, the rate per second for each statistic is displayed instead
of the delta.
Monitor commands are similar to show commands, but only statistical information is
displayed. Monitor commands display the selected statistics according to the configured
number of times at the interval specified.
Parameters ip-filter-id — displays detailed information for the specified filter ID or filter name and its
filter entries
Values 1 to 65535 or filter-name (up to 64 characters)
entry-id — displays information for the specified filter entry ID
Values 1 to 65535
seconds — configures the interval for each display in seconds
Values 3 to 60
Default 10
repeat — configures how many times the command is repeated
Values 1 to 999
Default 10
To Next Page
Loading...
