File System Management
114
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
4.2.5 Deleting Files and Removing Directories
Use the delete and rd commands to delete files and remove directories. Directories
can be removed even if they contain files and/or subdirectories. To remove a
directory that contains files and/or subdirectories, use the rd rf command. When files
or directories are deleted, they cannot be recovered.
The force option deletes the file or directory without prompting the user to confirm.
Use the CLI syntax displayed below to delete files and then remove directories:
CLI Syntax: file>
delete file-url [force]
rd file-url [force]
The following displays an example of the command syntax:
ALU-1>file cf3::\test1\ # delete test.cfg
ALU-1>file cf3::\test1\ # delete abc.cfg
ALU-1>file cf3::\test1\test2\ # cd test3
ALU-1>file cf3::\test1\test2\test3\ # cd ..
ALU-1>file cf3::\test1\test2\ # rd test3
ALU-1>file cf3::\test1\test2\ # cd ..
ALU-1>file cf3::\test1\ # rd test2
ALU-1>file cf3::\test1\ # cd ..
ALU-1>file cf3::\ # rd test1
ALU-1>file cf3::\ #
Use the CLI syntax displayed below to remove a directory without first deleting files
or subdirectories:
CLI Syntax: file>
rd file-url rf
4.2.6 Displaying Directory and File Information
Use the dir command to display a list of files on a file system.
Use the type command to display the contents of a file.
Use the version command to display the version of a 7705 SAR both.tim file.
To Next Page
Loading...
