Nokia 7705 - 6.1 System Management Parameters; 6.1.1 System Information; 6.1.1.1 System Name; 6.1.1.2 System Contact

System Management
194
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
6.1 System Management Parameters
System management commands allow you to configure basic system management
functions such as the system name, the router’s location, coordinates, and CLLI
code, as well as time zones, Network Time Protocol (NTP), Simple Network Time
Protocol (SNTP) properties, CRON, and synchronization properties.
6.1.1 System Information
System information components include:
• System Name
• System Contact
• System Location
• System Coordinates
• Common Language Location Identifier
• System Identifier
• PoE Power Source
6.1.1.1 System Name
The system name is the MIB II (RFC 1907, Management Information Base for
Version 2 of the Simple Network Management Protocol (SNMPv2)) sysName object.
By convention, this text string is the node’s fully qualified domain name. The system
name can be any ASCII printable text string of up to 32 characters.
6.1.1.2 System Contact
The system contact is the MIB II sysContact object. By convention, this text string is
a textual identification of the contact person for this managed node, together with
information on how to contact this person.The system contact can be any ASCII
printable text string of up to 80 characters.