System Management
272
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
6.10 Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed to
configure system parameters and provides the CLI commands.
• System Information
• Configuring Synchronization and Redundancy
• Configuring ATM Parameters
• Configuring Backup Copies
• Configuring System Administration Parameters
• System Timing
6.10.1 System Information
This section covers the basic system information parameters to configure the
physical location of the 7705 SAR, contact information, router location information
such as an address, floor, and room number, global navigation satellite system
(GNSS) coordinates, and system name.
Use the CLI syntax displayed below to configure the following system components:
• System Information Parameters
• System Time Elements
6.10.1.1 System Information Parameters
General system parameters include:
• Name
• Contact
• Location
• CLLI Code
• Coordinates
• System Identifier
To Next Page
Loading...
