File System Management
116
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
4.2.7 Repairing the File System
Use the repair command to check a compact flash device for errors and repair any
errors found.
Use the CLI syntax displayed below to check and repair a compact flash device:
CLI Syntax: file
repair [flash-id]
The following displays an example of the command syntax:
ALU-1>file cf3:\ # repair
Checking drive cf3: on slot A for errors...
Drive cf3: on slot A is OK.
To Next Page
Loading...
