Nokia 7705 - 6.10.3 Configuring ATM Parameters

Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 293
config>redundancy>multi-chassis>peer# exit
config>redundancy>multi-chassis# exit
config>redundancy#
The following displays the configuration:
A:7705:Dut-A>config>redundancy# info
----------------------------------------------
multi-chassis
peer 10.10.10.2 create
description "Mc-Lag peer 10.10.10.2"
mc-lag
lag 1 lacp-key 32666 system-id 00:00:00:33:33:33 system
priority 32888
no shutdown
exit
no shutdown
exit
exit
----------------------------------------------
A:7705:Dut-A>config>redundancy#
6.10.3 Configuring ATM Parameters
The ATM context configures system-wide ATM parameters.
CLI Syntax: config>system#
atm
atm-location-id location-id
Example: config>system# atm
config>system>atm# atm-location-id
03:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
The following example shows the ATM configuration.
ALU-1>config>system>atm# info
----------------------------------------------
atm-location-id 03:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
exit
----------------------------------------------
ALU-1>config>system>atm#