Basic System Configuration Guide Boot Options
Edition: 01 3HE 11010 AAAC TQZZA 147
5.2 Initial System Startup Process Overview
Figure 8 displays the process for starting a system that has a removable compact
flash. This example assumes that the boot loader, BOF, and the image and
configuration files are successfully located. For a system with a non-removable
compact flash, the first step in Figure 8 does not apply.
Figure 8 System Startup Flow
SAVE CONFIG CHANGES
INSERT FLASH CARD INTO COMPACT FLASH SLOT
POWER CYCLE ROUTER
ESTABLISH ROUTER CONNECTION (CONSOLE PORT)
ASSIGN IP ADDRESS TO THE CSM
CONFIGURE/MODIFY BOF FILE LOCATIONS
RUN ADP (INITIAL STARTUP)
POWER BOOT.LDR FILES FOUND
BOF FILES FOUND
START
21217
PRIMARY IMAGE
PRIMARY CONFIG
SECONDARY IMAGE
SECONDARY CONFIG
TERTIARY IMAGE
TERTIARY CONFIG
To Next Page
Loading...
