Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 295
6.10.5 Configuring System Administration Parameters
Use the CLI syntax displayed below to configure various system administration
parameters.
Administrative parameters include:
• Disconnect
• Set-time
• Display-config
• Tech-support
• Save
• Reboot
• Post-Boot Configuration Extension Files
CLI Syntax: admin
disconnect [address ip-address | username user-name
| {console | telnet | ftp | ssh | mct}]
display-config [detail | index]
reboot [active | standby][upgrade][now]
set-time date time
save [file-url] [detail] [index]
6.10.5.1 Disconnect
The disconnect command immediately disconnects a user from a console, Telnet,
FTP, SSH, SFTP, or MPT craft terminal (MCT) session.
The ssh keyword disconnects users connected to the node via SSH or SFTP.
CLI Syntax: admin
disconnect [address ip-address | username user-name
| {console | telnet | ftp | ssh | mct}]
Example: admin# disconnect
The following example displays the disconnect command results.
Note: Configuration modifications are saved to the primary image file.
To Next Page
Loading...
