Basic System Configuration Guide Boot Options
Edition: 01 3HE 11010 AAAC TQZZA 153
5.4.3.1 Running SSH
After the IP parameters are configured, the CLI can be accessed with an SSH
connection. To establish an SSH connection, run an SSH program and issue the
SSH command, followed by -l and the user name (optional), followed by the IP
address.
The following displays an example of an SSH connection with the default admin user
(the default password is admin).
C:\>ssh -l admin 192.168.1.xx1
TiMOS-B-0.0.I2263 both/hops NOKIA SAR 7705
Copyright (c) 2016 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Jul 30 00:11:49 EDT 2016 by csabuild in /rel0.0/I2263/panos/main
admin@192.168.1.xx1’s password: ########
To Next Page
Loading...
