Basic System Configuration Guide Boot Options
Edition: 01 3HE 11010 AAAC TQZZA 189
5.13.2.2 Show Commands
bof
Syntax bof [cflash-id | booted]
Context show
Description This command displays the Boot Option File (BOF) executed on the last system boot or on
the specified device.
If no device is specified, the BOF used in the last system boot displays. If the BOF has been
modified since the system boot, a message displays.
Parameters cflash-id — the cflash directory name. The slot name is not case-sensitive. Use
uppercase or lowercase “A” or “B” for the slot name.
Values see Table 14 for parameter descriptions and values
booted — displays the boot option file used to boot the system
Output The following outputs are examples of BOF information, and Table 22 describes the fields.
Output Example
A:ALU-1# show bof cf3:
=====================================================================
BOF on CF3:
=====================================================================
primary-image ftp://*:*@xxx.xxx.xxx.xx/home/csahwreg17/images/both.tim
primary-config ftp://*:*@ xxx.xxx.xxx.xx /home/csahwreg17/images/dut-a.cfg
address xxx.xxx.xxx.xx /24 active
address xxx.xxx.xxx.xx /24 standby
primary-dns xxx.xxx.xxx.xx
dns-domain labs.ca.alcatel-lucent.com
static-route xxx.xxx.0.0/24 next-hop xxx.xxx.xxx.x
autonegotiate
duplex full
speed 100
wait 3
persist off
no fips-140-2
console-speed 115200
===============================================================================
A:ALU-1#
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.
To Next Page
Loading...
