Basic System Configuration Guide CLI Usage
Edition: 01 3HE 11010 AAAC TQZZA 49
— [no] time-stamp
3.9.1.3 Monitor Commands
monitor
— filter
— ip ip-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— ipv6 ip-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— management-access-filter
— ip entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— ipv6 entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— port port-id [port-id...(up to 5 max)] [interval seconds
] [repeat repeat] [absolute | rate]
— router router-instance
— router service-name service-name
—ldp
— session ldp-id [ldp-id...(up to 5 max)] [interval seconds] [repeat repeat]
[absolute | rate]
— statistics [interval seconds] [repeat repeat] [absolute | rate]
—pim
— group grp-ip-address [source ip-address] [interval interval] [repeat repeat]
[absolute | rate]
—rip
— neighbor neighbor [neighbor
...(up to 5 max)] [interval seconds] [repeat repeat]
[absolute | rate]
—vrrp
— instance interface interface-name vr-id virtual-router-id [ipv6] [interval
seconds] [repeat repeat] [absolute | rate]
— service
— id service-id
— sap sap-id [interval seconds] [repeat repeat] [absolute | rate]
— sap-aggregation-group group-id [interval seconds] [repeat repeat] [absolute
| rate]
— sdp {sdp-id | far-end ip-address} [interval seconds] [
repeat repeat] [absolute
| rate]
3.9.1.4 Rollback Commands
admin
— rollback
— compare [to checkpoint2]
— compare checkpoint1 to checkpoint2
— delete checkpoint-rescue
— revert checkpoint-rescue [now]
— save [comment comment] [rescue]
— view [checkpoint-rescue]
admin
— redundancy
To Next Page
Loading...
