Basic System Configuration Guide CLI Usage
Edition: 01 3HE 11010 AAAC TQZZA 87
service
Syntax service
Context monitor
Description This command enables the context to configure criteria to monitor specific service SAP
criteria.
id
Syntax id service-id
Context monitor>service
Description This command displays statistics for a specific service, specified by the service-id, at the
configured interval until the configured count is reached.
The first screen displays the current statistics related to the service-id. The subsequent
statistical information listed for each interval is displayed as a delta to the previous screen
output.
When the keyword rate is specified, the rate per second for each statistic is displayed instead
of the delta.
Monitor commands are similar to show commands, but only statistical information is
displayed. Monitor commands display the selected statistics according to the configured
number of times at the interval specified.
Parameters service-id — identifies the service in the service domain
Values 1 to 2147483690 or service-name
sap
Syntax sap sap-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>service>id
Description This command displays statistics for a SAP associated with this service.
This command displays statistics for a specific SAP, identified by the port ID and
encapsulation value, at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the SAP. The subsequent statistical
information listed for each interval is displayed as a delta to the previous screen output.
When the keyword rate is specified, the rate per second for each statistic is displayed instead
of the delta.
To Next Page
