Nokia 7705 - 6.10.2.1 Configuring Synchronization; 6.10.2.2 Configuring Manual Synchronization; 6.10.2.3 Forcing a Switchover

System Management
290
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
6.10.2.1 Configuring Synchronization
The switchover-exec command specifies the location and name of the CLI script file
executed following a redundancy switchover from the previously active CSM card.
CLI Syntax: config>system
switchover-exec file-url
6.10.2.2 Configuring Manual Synchronization
Automatic synchronization can be configured in the config>system>
synchronization context.
Manual synchronization can be configured with the following command:
CLI Syntax: admin
redundancy
synchronize {boot-env | config}
Example: admin>redundancy# synchronize config
The following shows the output that displays during a manual synchronization:
ALU-1>admin# synchronize config
Syncing configuration......
Syncing configuration.....Completed.
ALU-1#
6.10.2.3 Forcing a Switchover
The force-switchover now command forces an immediate switchover to the
standby CSM card.
CLI Syntax: admin>redundancy
force-switchover [now]
Example: admin>redundancy# force-switchover now
ALU-1# admin redundancy force-switchover now
ALU-1y#
Resetting...
?